The Details of Single Ply Roofing System You Must Not Miss

Single-ply roofing system has become the most popular options for both industrial and commercial buildings. Obviously, property managers are committed to maintaining their roofs in the best condition possible. Read on to learn about some great tips!

First Step:

Even before the architect prepares the roof plans, some factors must be taken into account.

      • Site features – Location, site location, conditions, and hassle-free access for materials delivery, material availability, and expert roofing companies in the area.
      • Building features – what it will use for, building height, flooring.
      • Features of roof –drainage, access points, deck slope, and roof load equipment.
      • Law and decrees – consider fire codes, local decrees, zoning laws,which may affect working hours.

Considerations of Design

A good roof begins with a trendy design so ensure you draw up the plans for you professionally. Some factors have to be taken into account here.

      • Go for a suitable color membrane –It is better to use a lightcolored membrane when cooling days are surpassed by heating days.
      • Choose a large membrane over large areas.
      • Choose the most suitable deck-type isolation or attachment method of direct membrane. The mechanical fitting — screws and plates — is better for wood, light cement, cement-fed wood, and gypsum and stainless steel decks. Adhesives on these deck types can be applied, but best placed on a concrete deck.
      • Select a system that best suits the use of the building. For example, select a system that does not degrade or degrade the grey residues that a restaurant has produced. Maybe a roofing system resisting punctures is a good choice for a school.
      • Be sure the roof termination is climate-friendly. For example, salt water corrodes metal so that you should select materials resistant to corrosion.
      • Make sure your choice of roofing is supported by the correct hard substrate, particularly where high foot traffic and storm are prone. Softer substrates lead to additional damage.

Considerations of Installation

However, without proper installation even the best roof design in the world won’t keep the weather out. Here are some things that you should look at during the installation phase.

      • Substrate-specific materials should be correctly attached to the metal terminations to ensure adequate wind resistance.
      • Do not add termination bars or cross bars to a solid bar.
      • Welds should fulfil the less requirement of width.
      • Clean the membrane edges before soldering or attaching.
      • Ensure that no gaps exist in between the boards.
      • Put patches at the end of runs when a T overlap is created by the seams.
      • Check the seams for tightness several times every day during installation.
      • Ensure the correct amount of mechanical fastening or adhesive is used.
      • Ensure that a walk pad is installed for all access points to minimize wear.

Considerations of Maintenance

Consistent maintenance is prime factor to prolong the life ofsingle-ply roofing system. You will have to check your roof twice a year and more often if you have experienced serious storms. Watch for the things that follow.

      • Make sure the seams are intact.
      • Make sure no loose terminations are available.
      • There should be no punctures on the membrane and flashing.
      • Look for attachments that can pound through the membrane.

Consider Tier 1 Contracting

Come to Tier1 Contracting in OKC if you wish to go for single ply roofing system. Our expert team will provide a flawless service that would make you go ‘wow’. Pay your visit to our office now!

Get in Touch